P0102 on a Nissan Rogue
P0102 means mass Air Flow (MAF) Circuit Low Input. On the Rogue, a few causes come up far more than others.
What P0102 usually means on a Rogue
P0102 means the Rogue's mass-airflow sensor is reading abnormally low, and Nissan MAF sensors are a recognized weak point. A dirty or failing MAF distorts the air measurement, producing hesitation, stalling, or poor economy, and often pairs with lean fuel-trim codes. Cleaning may help, but a drifting sensor usually needs replacement.
Most common causes on the Rogue
- Dirty or failed MAF sensor
Nissan MAF sensors contaminate or drift, reading low and setting P0102.
- Intake leak before the MAF
A loose air-box connection or unmetered air skews the signal.
- Wiring or connector fault
A corroded MAF connector drops the circuit low.
- Clogged air filter
A heavily restricted filter reduces measured airflow.
What P0102 costs to fix on a Rogue
Clean the MAF with proper sensor cleaner first - nearly free and sometimes enough. A replacement MAF is a moderate Nissan part and a quick swap. Check the air-box connection and connector before spending, since an intake leak can mimic a bad sensor.
Year, engine and mileage change the answer. Start a case and Redline weighs these causes against what your car shows, then names the check that would settle it.
Other codes on the Nissan Rogue
Nissan Rogue problems & recalls by year
Based on widely reported patterns for this model; individual causes vary by year, engine and history. Generic P0102 behavior is covered on the main P0102 page. Confirm with a scan tool before buying parts.
P0102 on your Rogue?
Every problem becomes a Case. Tell Redline what your Rogue is doing: it shows what the evidence supports, what’s still missing, and what to check next, before you approve a repair.
“Inner pad ~1 mm. Outer pad 3 mm.”
Next: check the slide pins move freely before buying parts.